The reasons why there is no sound on your computer normally are the hardware faculty, the wrong audio settings or the missing or outdated audio driver in your computer.ĭon’t worry. You can try the solutions below to troubleshoot and fix no sound on computer issue and have your computer back in track. If your computer suddenly occurs to the no sound issue, there is likely a problem with the hardware issue. You can troubleshoot by the following tips: 1. Simply take a look at the speaker on your computer and see whether there is anything covering upon the speaker, which could cause no sound on your computer. Make sure there is no dust or cloth that can cover the sound on your computer. Look inside the headphone jack see if there is any obstacle that may stop the headphone from working properly. If there is, clean the jacks with a cotton swab or soft brush. Push it into the jack and swirl it around a little bit to get the dust and lint out. You can try to disconnect the headphone and see there is sound. If yes, it seems to be your headphone issue, so you can replace it with a normal headphone.įix 2: Check the audio settings in your computer If your computer is connecting to a headphone, you can also check your headphone to make sure that the devices are working normally. If the hardware works properly after troubleshooting, but still no sound on your computer, you can check the audio settings in your computer. Note: All the screenshots below are shown on Windows 10, but the fixes apply to Windows 8 & 7. Check Volume mixer settingsġ) Right click the volume icon at the bottom right corner, and click Open Volume mixer.Ģ) Make sure all the entries at not in the minimum level. In my case I set Speakers, System Sounds and HyperSnap to 20.ģ) Now test and see if there is any sound from your computer.
0 Comments
Leave a Reply. |